Cut and isolate areas with scope boxes in Revit
Ever had a Revit project which is so large that you are having performance issues and trouble working on it? Want to work on a specific area of the building (possibly cores) without being slowed down by the data in the rest of the building?
Using a section box will give you the desired visual effect but the project will still be as heavy as it was prior to narrowing down the view to only show the elements you are presenting / working with.
Setting up worksets to narrow down the elements by cores is also an option, but unless you have set the project up with this in mind, it could take a while to set up and re-edit all your worksets.
For this example I will use the Revit sample project as I’m not able to post information on the project we needed to do this on. Go to the ‘View’ tab and select ‘Scope box’ create your box on a floor plan and ensure that the vertical extents are at the desired position on a 3D view.
Once you have done this, we will use the ‘Coins Auto-Section box’ add-in to isolate the scope box, just giving us the area of the building that we want to display / work with. Select the scope box, go to the ‘Add-Ins’ tab and click ‘Auto Section Box’. Name your view and either give a custom size or as I usually do, select the ‘Element extents, plus buffer’ 300mm is the default (giving you a 300mm tolerance on each side of the selected elements).
You should now have the selected area of your building isolated in a section box. We will now want to highlight this whole area including all elements in the scope box. If you can see other elements that were also selected in your view at this point you can shift de-select all these. Now you will want to click on ‘Hide Element’. The section box and all elements inside will now be hidden. Apply hide/isolate to view.
Staying in the same view, go to your ‘Properties’ palette and turn off your section box. You should now see the rest of your building MINUS the elements that you want to work with. Highlight all the remaining elements and delete them. (Make sure you have a file backup!). Once you have done this, click on your light bulb icon and unhide all elements in view. You will now be left with the elements you want to work with, and a much lighter project.
You will notice that any elements which are attached to this view will also remain (floor slabs + walls which were associated with the selected elements). You can either go and edit each one of these elements, or just use the same method of selecting the scope box and creating a section with the Coins auto-section box add-in. Your project should now be a lot lighter and more workable.
Chances are you hopefully won’t be in the situation where you’ll need to utilise this tip if you’ve planned your Revit project effectively. If you are working on / repairing someone else’s model that may not be the case ;)