Revit Adaptive families – an introduction

Adaptive points are a tool which has been available in Revit since the 2011 release. They are an adaption of the pattern based curtain panel. Adaptive families, unlike a standard parametric family, which can be resized by flexing and changing values are able to adapt to different situations and scenarios in a building, controlled by the points you setup. They are often used for panels and curtain panels which are similar in appearance and function but different sizes. Adaptive families are able to ‘adapt’ to their surrondings by settings points as markers or connectors. e.g. A square panel will have 4 adaptive points which you will add on each of the 4 corners of the structural framing.

Like all tools in Revit, there are a number of different complexities to adaptive families, they can be used for simple geometry for instance piping or beams all the way up to advanced modeling techniques, such as rotating panels requiring an excellent work station to be able to handle the detail and repetition on a large scale. In this post I will be trying to explain the basics in a simple and understandable way.

Before jumping in to creating an adaptive family, it is worth taking some time out to plan how your family is going to function. With normal generic families, we lay out reference planes to constrain our geometry, with adaptive panels I like to use reference planes in a grid format and repeat the same grid in the Revit project when adding the family. This consistency will reduce the chances of errors etc when you are loading your family. 

A few things to consider before starting your adaptive family:

  • Add your ‘Point Elements’ in the same order that you want to insert your geometry into your project.
  • Remember to set out grids if you are working on more than one level.
  • Adaptive points have their own X and Y reference planes attached, when working with solid forms, use these planes to constrain the points to the geometry.
  • Be sure to use ‘Reference Lines’ rather than ‘Model Lines’ when referencing your point to the form.
  • Be patient, and test your points are acting and reacting the way you expect, in the same way you’d flex a standard Revit family.
  • There’s nothing worse than rushing through and finding out you have to start all over due to a simple mistake.

The first thing you need to do is open up a new “Adaptive Genric Model Family” this will give you a blank template with and X and Y reference plane. Hold down Ctrl + Shift and with your mouse left click and drag the current reference planes to make copies of them, set out your planes similar to how I have in the image below. Keep a consistency with the spacing between planes, this is important when bringing the family into your project. Add some points and arrange them as you need: 

uploaded image

Use the view cube to lay out your points, you may notice that your points aren’t snapping to the reference planes unless you are in a ‘top’, ‘left’ or ‘right’ view. As mentioned above, make sure to enter your points in the same sequence you will add them into your project. Once you are happy with the location of your points, highlight them all and click the ‘Make Adaptive’ icon on the ‘Adaptive Component’ tab. In this instance, I am going to create a random form, just to illustrate how adaptive points work. 

uploaded image

Use the ‘Set’ tool in the work plane tab, and go through each adaptive point one by one and select the horizontral face as shown on point 5 above. Once we are working on the correct plane, we can begin to create the starting point for our geometry. When creating these circles as shown above make sure to use ‘Reference Lines’ rather than model lines. Solid forms and masses can be constrained and controlled by reference lines but not model lines. We now want to add some parameters to our reference circles. To do this, simply highlight the reference circle, and click the ‘Make this temporary dimension permanent’ icon as shown below.

uploaded image

Once we have made all of our reference lines into permanent dimensions, we are able to add a parameter to control the size of the circles. Simply add a type parameter in the way you would with a normal family. Select the dimension, click on the ‘Add label’ dropdown in the actions bar and a parameter name related to the object. I will use ‘Bottom Width’ for point 5 and ‘Top Width’ for points 1-4 as they will all be the same size. You will now see these parameters appear in the ‘Family Types’ dialogue where you will be able to control the dimensions and add formulas etc. Set your reference lines to the correct sizes and we are almost ready to start adding some geometry. It is a good idea to test your new parameters and move your adaptive points around to check that everything is behaving correctly. 

uploaded image

We now want to add some solid geometry to our adaptive points. There are of course a number of different ways to do this depending on the desired result. Here I will be selecting point 1-5, 2-5, 3-5, 4-5. Select reference line 1 and while holding down control, tab through your elements until you are selecting reference line with adaptive point 5 in. Select both of these and then hit ‘Create Form’ in the ‘Form’ tab on the ribbon. Repeat this step until you have 4 ‘spokes’ coming out of the wider base. If you have followed the same instructions that I have given, your adaptive family will look like the image below.  

uploaded image

Again you should now move around your adaptive points and test your parameters to check that they are performing the way they should be. Once you have completed this you are ready to save your family and add it in to a revit project. Test it out by connecting it to a Mass. It is a simple procedure and only requires you to add the points in the same way that you have added them in your family. I sometimes find it easier to recreate the grids in a mass environment in the Revit project. You can also switch nodes on to your grid lines to make the placing of points simpler. 

If you have any problems or questions, leave me a comment and I’ll get back to you as soon as possible.

Advertisements

Tags: , , , ,

About Ben Malone

Information Manager for BIM.Technologies in London

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: